The Ford Truck / Semi Truck AC Drier 1911013 is a steel accumulator for the air conditioning systems on Ford F600, F800, L8000F and L-Series vocational trucks built in the mid to late 1990s. Its body dimensions and port sizes match the original unit on the applications listed in the fitment table below, so it goes in as a direct replacement rather than a modified fit. The same part is carried across the full truck AC drier range, with the Ford applications grouped under Ford AC driers.
The accumulator sits on the low-pressure side of the system, after the evaporator. It holds the desiccant that pulls moisture out of the refrigerant and separates liquid refrigerant from vapour before it reaches the compressor. The desiccant has a finite capacity, which is why this part is normally changed whenever the system has been opened up, and in particular alongside a compressor replacement.
Key Features
- Steel body, 9.5″ overall length and 3.5″ diameter
- Male insert O-ring inlet, 1/2″ #8
- Male insert O-ring outlet, 3/4″ #12
- Cross-referenced to nine Ford OEM part numbers, listed below
- Covers Ford F600, F800, L8000F, L8501, L8511, L8513, L9000 and L9501 chassis
Specifications and OEM Cross Reference
| Product Name | Accumulator |
| Length | 9.5″ |
| Inlet | MALE INSERT O-RING |
| Inlet Size | 1/2″ #8 |
| Outlet | MALE INSERT O-RING |
| Outlet Size | 3/4″ #12 |
| Diameter | 3.5″ |
| Material | STEEL |
OEM numbers replaced: 319259, 319309, 4C4H19808AA, 4C4H19C808AA, ABPN83319309, F6HH19E647AA, F6HZ19C836A, F7HH19E647AB, XC4H19E647AA
Ford Truck Fitment
| Make: | Model: | From Year: | To Year: |
| Ford | F800,F600 | 1995 | 1999 |
| Ford | L8000F | 1996 | 1997 |
| Ford | L8501, L8511, L8513, | 1996 | 1998 |
| Ford | L9511,L9513, L9522 | 1996 | 1998 |
| Ford | L9000, L9501 | 1996 | 1998 |
Installation Notes
- Recover the refrigerant before opening the system, following local refrigerant handling regulations.
- Check the inlet and outlet sizes and their orientation against the unit being removed before fitting.
- Add refrigerant oil according to the OEM service procedure for the specific chassis.
- Match the number stamped on the original part against the OEM cross reference above, since year ranges on some chassis vary by build date.
This part is covered by the Quick Fit Parts Return Policy and Warranty.






Reviews
There are no reviews yet.